REAR PROP SHAFT G11 (438) *26-05*
59,007 km
AU $620.00
Available stock
-
-
REAR PROP SHAFT E90 P4 (333) *26-05*23,544 kmAU $500.00 -
REAR PROP SHAFT F26 (801) *26-05*25,343 kmAU $500.00 -
REAR PROP SHAFT E84 (482) *26-05*18,105 kmAU $500.00 -
REAR PROP SHAFT F15 (129) *26-05*62,799 kmAU $500.00 -
REAR PROP SHAFT F30 D4 (042) *26-05*26,635 kmAU $500.00 -
REAR PROP SHAFT F25 (801) *26-05*12,233 kmAU $500.00 -
REAR PROP SHAFT F30 P3 (031) *26-05*30,608 kmAU $500.00 -
REAR PROP SHAFT E89 u/r68,141 kmAU $500.00 -
REAR PROP SHAFT F32 (042) *26-05* D444,638 kmAU $500.00 -
REAR PROP SHAFT F16 (128) *26-05*39,523 kmAU $500.00 -
REAR PROP SHAFT F32 (041) *26-05*59,957 kmAU $500.00 -
REAR PROP SHAFT F30 D4 (018) *26-05*28,238 kmAU $500.00 -
REAR PROP SHAFT E90 P4 (333) *26-05*34,136 kmAU $500.00 -
REAR PROP SHAFT F30 D4 (018) *26-05*66,956 kmAU $500.00 -
REAR PROP SHAFT F15 (128) *26-05*73,839 kmAU $500.00 -
REAR PROP SHAFT F20 (488) *26-05*84,388 kmAU $500.00 -
REAR PROP SHAFT E71 P/N 7.589.129 (30dX 1427MM LENGTH) 04/10-60,707 kmAU $500.00 -
REAR PROP SHAFT F26 (801) *26-05*16,549 kmAU $500.00 -
REAR PROP SHAFT F25 (801) *26-05*10,382 kmAU $500.00
Helpful Information
This guide aims to provide 'general' information about BMW transmissions, such as common issues that we've encountered and tips on determining fitment compatibility.
The main issue with BMW tail shafts are the centre bearings/mounting bushes—which connect the two sections of the tail shaft and mount the assembly to the undercarriage. These can be purchased separately new, but sometimes other factors make it more economical/prudent to replace the entire shaft.
The uni-joints in tail shafts can also wear out—though it is less common. When this occurs you need to replace the entire assembly.
Tail shafts are used in rear-wheel drive (RWD) and all-wheel drive (AWD) drivetrains. They connect the transmission (or transfer case in AWDs) to the rear axle differential—distributing the engine’s power to the rear wheels.
There are usually multiple, non-exchangeable types of tail shaft within any given model generation—which is usually to account for different engine types.
The best way to determine fitment compatibility of a tail shaft is to match the BMW part numbers from the catalogue. This can be done by decoding your vehicle’s VIN in a BMW EPC (electronic part catalogue.)
If you don’t have access to an EPC, provide our team with your vehicle’s 17-digit VIN—and we’ll check our stock for a compatible match.
Tail shafts will often interchangeable between similar models with similar/alike engines.
Contact us
Can't find what you're after? Don't know what part fits your car? Contact our sales team and they'll check our stock & provide you with a quote.
